Technical Data
Bioxe™ ESD-01
A two-pack electrostatic discharge pigmented, solvent free, 100% solids epoxy with excellent surface hardness and adhesion. High water, chemical, and oil resistance.
Key Benefits
Exceptionally hard wearing
Easy mix ratio
Light reflective
Easy to clean
Silica free
Manufactured from bio source and renewables
Technical Specifications
Vehicle TypeEpoxy
HardenerAmine
Mixing Ratio3:1 (Part A : Part B) by volume
Pot Life~25 min @ 25°C
FinishStippled
Coverage5–7 m² per litre per coat
Volume Solids100%
Coats Required1
ColourDC Grey (similar to N35 Light Grey)
Product Weight1.45 kg/litre
Performance
Abrasion ResistanceVery good
Electrical ResistanceRg < 10⁹ Ω (IEC 61340-4-1)
Dry Heat ResistanceUp to 120°C
Hot Water ResistanceUp to 70°C
Application Temp8–35°C
DurabilityExcellent (will chalk under UV without coating damage)
Cure Times @ 25°C
24hoursFoot Traffic
72hoursVehicular Traffic
7daysFull Cure
Safety & Handling
ClassificationSolvent free, 100% solids epoxy
HandlingWear protective gloves, clothing, and eye protection
Storage12 months in sealed containers, away from heat and moisture
Packaging10 litre kits (7.5L Part A + 2.5L Part B)